Continuous Monitoring The CPC-1 Particle Counters are aimed specifically to meet the revised Annex 1 to the EU GMP guide • Offering 0.5µm and 5.0µm particle counts per cubic foot and per cubic metre, allows early detection of out of compliance values while retaining adherence to the revised Annex 1. • Designed for ease of calibration and routine maintenance. Particle Counters • We offer the hand held HHPC range from MetOne. • Ideal for discontinuous monitoring of clean room facilities in hospital pharmacies, pharmaceutical and microelectronic production facilities. • 0.3µm, 0.5µm, 0.7µm, 1.0µm, 2.0µm and 5.0µm at 0.1 cfm (2.83 l/min) sampled via the internal pump. • Battery powered, with up to six hours continuous operation. • Internal storage of 500 sample records including sample location identifiers. • Absolute or concentration counting modes with audio facility for leak detection. • Measures temperature, relative humidity, particle counts, sample volume and alarms. • Download stored data via RS232/485 using Windows 95/98/NT/2000 utility software for use in spreadsheets. • 'Point of use', continuous monitoring units - MetOne 4815: • Ideal for continuous monitoring of clean room facilities in hospital pharmacies and pharmaceutical point of fill production facilities • Measures 0.5µm and 5.0µm particles at 1.0 cfm • Can be mounted close to the critical process eliminating particle loss associated with long tubing runs. • Units can be distributed conveniently around the facility using built-in RS485 network. • Background sampling, manifold based units MetOne 2408 • Measures 0.5µm and 5.0µm at 1 cfm via internal pump. • Up to 32 sample locations via manifold expander. • Vacuum pumps • Low particle loss tubing.