Continuous Particle CountersS2216 Series
The CPC Series of particle counters are aimed specifically to meet the revised Annex 1 to the EU GMP guide.
- Offering 0.5µm and 5.0µm particle counts per cubic foot and per cubic metre allows early detection of out of compliance values while retaining adherence to the revised Annex 1.
- Integral flow monitoring ensures compliance during particle count measurement – blockage or pump failure is immediately detected.
- These 'point of use' counters are ideal for continuous monitoring of clean room facilities in hospital pharmacies and pharmaceutical point of fill production facilities.
- Units can be mounted close to the critical process eliminating particle loss associated with long tubing runs
- Designed for ease of calibration and routine maintenance, the particle counters can be swapped by clean room operators without re-programming.
S2216 Series Particle Counter
Particle Counters Data Sheet
News & Events
New I/O module range
Pharmagraph has added new of I/O modules to their range. Optimised for use with enVigil Lite, the new modules include Relay Output for control of particle counters, high accuracy PRT temperature inputs and 4-20mA analog inputs for differential pressure, temperature and humidity. All modules allow direct connection to transducers with no additional wiring or energisation.
Read more...
Environmental inputs for enVigil Lite
Developed from the hugely successful enVigil Facility Monitoring Software, enVigil Lite allows you to develop a particle counting application in minutes. Building on this, Pharmagraph now allow environmental inputs like pressure and temperature to be added with equal ease.
Read more...
Hospital pharmacies adopt enVigil
Leveraging the simplicity of a modular approach to hardware, software and documentation has allowed Pharmagraph to embrace Hospital Pharmacy applications with increasing success. Scalable from a single particle counter to a complete suite, enVigil systems are being widely adopted in the National Health Service.
